Enet WiFi Adapter Type C for JLR DoIP Vehicles

Name: Enet WiFi Adapter Type C for JLR DoIP Vehicles
Availability: InStock

$299.00

SX-TOOL Enet WiFi Adapter Type C for JLR DoIP-based Vehicles

Category: JLR Engineering Tool

Description

SX-TOOL Enet WiFi Adapter Type C

For JLR DoIP‑based Vehicles – Next‑Gen Ethernet Diagnostic & Coding Tool

The SX-TOOL Enet WiFi Adapter Type C is purpose‑built for modern Jaguar and Land Rover vehicles equipped with DoIP (Diagnostics over Internet Protocol). This dual‑mode interface combines wireless 2.4GHz WiFi and a direct USB Type‑C connection, giving you the fastest, most reliable link to your vehicle’s ECUs. Whether you’re performing complex module programming, reading fault codes, or unlocking hidden features, the adapter delivers stable, high‑speed ENET communication without the lag of traditional OBD2 dongles.

Compatible with factory‑level software like JLR DoIP VCI, Pathfinder, TOPIx, and SDD (DoIP‑ready), it’s the ultimate professional and enthusiast tool for Jaguar Land Rover diagnostics and coding.

⚡ Key Functions & Features

DoIP / Ethernet‑over‑OBD2 Protocol: Fully supports the diagnostics over Internet Protocol used in the latest JLR architectures – no legacy CAN limitations.
Dual Connectivity:
- Wireless WiFi 2.4GHz 802.11b/g/n – work cord‑free up to 30 meters.
- Wired USB Type‑C – plug directly into your laptop or tablet for an ultra‑secure, interference‑free connection.
Lightning‑Fast Read/Write: Flash ECU updates, code new modules, and log live data at speeds that leave Bluetooth adapters behind.
Full Diagnostic Suite:
- Read & clear DTCs (fault codes) from all control units
- Live data streaming & graphing
- ECU coding & parameterisation
- Component activation & service functions (battery registration, DPF regeneration, ABS bleeding, etc.)
- Module programming & software updates
Broad Software Compatibility: Works with JLR factory and independent applications:
- JLR DoIP VCI / SDD (Symptom Driven Diagnostics)
- JLR Pathfinder (Engineering / Service)
- JLR JET‑PRO, JET‑Master, JET‑LockSmith
- Third‑party tools that support ENET/DoIP (e.g., OVMS, custom CAN‑Ethernet bridges)
Safe & Reliable: Built‑in DC/DC converter and thermal heat sink guard against voltage spikes and overheating, protecting both the adapter and your vehicle’s ECUs.
Plug & Play: No drivers needed for most devices – just connect, select the adapter in your app, and start diagnosing.

🚘 Supported Car Models

⚠️ Please note: This adapter is designed for DoIP‑based JLR vehicles (typically MY 2017+ with the 18‑pin OBD Ethernet pin‑out or newer Ethernet gateways). It is NOT compatible with older CAN‑only Jaguar / Land Rover models (e.g., pre‑2016 XJ, early Discovery 3). Always verify DoIP support in your vehicle before purchasing.

Brand	Model / Platform	Generation / Code
Jaguar	XE	X760 (2015+)
Jaguar	XF	X260 (2015+)
Jaguar	F‑PACE	X761 (2016+)
Jaguar	E‑PACE	X540 (2017+)
Jaguar	I‑PACE	X590 (2018+)
Jaguar	F‑TYPE	X152 (2013+, facelift models support DoIP)
Jaguar	XJ (latest)	X351 (only 2018–2019 with Ethernet capability)
Land Rover	Discovery Sport	L550 (2014+ DoIP from MY17)
Land Rover	Discovery	L462 (2016+)
Land Rover	Defender (new)	L663 (2020+)
Land Rover	Range Rover Evoque	L551 (2019+) / earlier L538 DoIP not supported
Land Rover	Range Rover Velar	L560 (2017+)
Land Rover	Range Rover Sport	L494 (2013+, DoIP from MY17)
Land Rover	Range Rover	L405 (2012+, DoIP from MY17)
Land Rover	Range Rover Hybrid	L405 / L494 Hybrid

🔧 Technical Specifications

Diagnostic Protocol
DoIP (ISO 13400) over ENET (Ethernet on OBD2)

Wireless
2.4GHz IEEE 802.11b/g/n, up to 150 Mbps

Wired Interface
USB Type‑C (RJ45‑Ethernet emulation)

OBD Voltage
12V – 14V (self‑powered from vehicle)

WiFi Security
WPA2‑PSK, default SSID: SXTOOL_DoIP_XX, password: 12345678

WiFi Modes
Access Point / Station / Router

Transmission
Transparent bridge, baud rate up to 500000 bps

Certifications
CE, FCC, RoHS

📲 Quick Connection Guide

Insert the SX-TOOL adapter firmly into the vehicle’s OBD2 port (driver’s footwell).
Wireless: Enable Airplane mode on your device, turn off Bluetooth, then connect to Wi‑Fi to SXTOOL_DoIP_XXXX.
Wired: Connect the included Type‑C cable directly to your laptop/tablet – no wireless setup needed.
Open your diagnostic software (e.g., JLR DoIP VCI, Pathfinder) and select the ENET/DoIP interface. The adapter is recognised automatically.
Begin diagnostics, coding, or programming with full DoIP speed.